RO Membrane Cleaning Chemical We are the providers of a comprehensive range of RO Membrane Cleaning Chemical that are widely appreciated by our clients for their quality and purity. These RO Membrane Cleaning Chemical can aptly suit the requirements of various systems (Raw Water / ETP RO / UF/NF /Desalination Plant) and a variety of water quality (Surface / Bore well / Brackish / ETP / STP). Our chemicals are widely used for treatment purposes as :
- Pre-treatment
- Antiscalant (General / Specific)
- Antioxidant
- Antifoulant
- RO-cleaner (Inorganic / Organic / Colloidal / Specific)
- Preservative
RO Membrane Cleaning Chemical SILICA ANTISCLANT FOR RO AQUABLEND-902 is designed formulation of antisclant for the feed water with higher levels of silica & metal oxides. Use of aquablend-902 will ensure control of silica scales & fouling due to metal oxide. This will give longer performance of the machine. Product Features
- Allows effective scale control.
- Eliminate conventional treatment.
- Maximum recovery.
- Control deposition of suspended solids.
- Dosages - should be dosed in 1-10 ppm (neat).Dosing is done prior to the cartridge filter.
RO Membrane Cleaning Chemicals - R.O. CLEANING CHEMICAL AQUABLEND-921 is designed formulation of cleaners for the effective removal of carbonates,metal oxide & sulfate scales of barium,strontium & calcium in reverse osmosis system. Product Features
- For reverse osmosis system operating on feed water containing barium , strontium apart from the common hardness forming salts. Aquablend-921 effectively removes difficult barium sulfate scales also scales of calcium & strontium.
- Low foam formation & liquid cleaner which allows shorter mixing time.
- Cost effective.
- No adverse effect of working system.
- Dosages - should be dosed in 0.5 - 3 % solution in D.M. water.
RO Membrane Cleaning Chemicals - ANTISCLANT FOR R.O High Silica AQUABLEND 901 is designed formulation of antisclant for the feed water with higher levels of silica & metal oxides. Use of AQUABLEND 901 will ensure control of silica scales & fouling due to metal oxide. This will give longer performance of the machine. Product Features
- Allows effective scale control.
- Eliminate conventional treatment.
- Maximum recovery.
- Control deposition of suspended solids.
- Dosage - should be dosed in range of 1 -10 ppm ( neat ). Dosing is done prior to the cartridge.
|
