Home Page
Company Profile
Our Products
Water Treatment Chemicals
Fuel Additives
Boiler Chemical
Cooling Tower Chemicals
R.O Chemical
Descaling Chemicals
Chilling Plant Chemical
Resin Cleaning Chemical
Decarbonising Chemical
Oxygen Scavenger
Boiler Water Side Chemical
Boiler Fire Side Chemical
Cleaning Chemical
Boiler Cleaning Chemical
Cooling Tower Cleaning Chemical
Membrane Cleaning Chemical
Heat Exchanger Chemical
Furnace Oil Additives
Thermopack Cleaning Chemical
Online Boiler Chemical
offline Boiler Chemical
pH Booster Chemical
RO Membrane Cleaning Chemical
Cation/Anion Exchange Resin
Ion Exchange Resin
Softener Resin
Cation Exchange Resins
Anion Exchange Resin
Water Softner Resin
Non Regenerative Resin
Super Charged Resin
Demineralisation Plant Resin
D M Plant Resin
Contact Us
 

 
 
 
Home » Products » Membrane Cleaning Chemical » Membrane Cleaning Chemical

Membrane Cleaning Chemical



Membrane Cleaning Chemical

Product Code : 023

Product Specification

Membrane Cleaning Chemical


RO System if untreated cause several problems like inorganic, colloidal & bio fouling resulting in reduced permeate recovery, increased pressure differential & permeate conductivity, frequent membrane cleaning ultimately premature membrane failure. Scaling elements like carbonates, Sulphates, Silicates, iron, fluoride & aluminium are highly effective threshold agent inhibit precipitation of these salts by increasing their their solubility limit. It is also acts as iron sequester thereby iron fouling.

                        AQUABLEND - 902 ( SILICA ANTISCLANT FOR  R.O. )


Silica Antisclant For RO is designed formulation of antisclant for the feed water with higher levels of silica & metal oxides. Use of aquablend-902 will ensure control of silica scales & fouling due to metal oxide. This will give longer performance of the machine.

BENEFITS                   

Allows effective scale control.

 Silica Antisclant For RO minimizes scaling due to metal oxides & reduces cleaning frequency. Effective over wide range of concentration such as residual coagulants or aluminum  rich silica or iron. It is stable over broad range of pH & temperature.

Eliminate conventional treatment.

Silica Antisclant For RO successfully replaces conventional treatment of SHMP hence eliminating the drawbacks of using it.

Maximum recover        

Silica Antisclant For RO effectively controls calcium / strontium / barium scales providing optimum control of  feed water with conc. Silica level up to 280 ppm

Control deposition of suspended solids.

Silica Antisclant For RO dispersed slit & colloidal particles thereby keeping membrane clean. It is also non  corrosive liquid miscible with water.

 APPLICATION.

Silica Antisclant For RO  should be dosed in 1-10 ppm (neat ). Dosing is done prior to the cartridge filter.Numatik Engineers Pvt Ltd will provide technical assistance to setup optimum dosage according to operating  conditions  and system.

STORAGE & HANDLING

Silica Antisclant For RO  should be stored in an air tight container away from direct heat. Always store at cool & dry place.. Wash thoroughly with water in case of contact. Do not swallow.

Silica Antisclant For RO  is available in 20 Kg. HDPE drum.

 

                                         AQUABLEND - 921 ( Membrane Chemical ) 

Cleaning Chemical is designed formulation of cleaners for the effective removal of carbonates , metal oxide & sulfate scales of barium , strontium & calcium in reverse osmosis. Sysrem.

BENEFITS

For reverse osmosis system operating on feed water containing barium , strontium apart from the common hardness forming salts. Cleaning Chemical effectively removes difficult barium sulfate scales also scales of calcium & strontium.           

Low foam formation & liquid cleaner which allows shorter mixing time.                                                                                       

Cost effective.

No adverse effect of working system.

APPLICATION.

 Cleaning Chemical should be dosed in 0.5 - 3 % solution in D.M. water.Numatik  Engineers Pvt Ltd will provide technical assistance to setup optimum dosage  according to operating  conditions  and system.

STORAGE & HANDLING

Membrane Chemical should be stored in an air tight container away from direct heat. Always store at cool & dry place.. Wash thoroughly with water in case of contact. Do not swallow.

Cleaning Chemical  is available in 20 Kg. HDPE drum.
<< Back






Contact Details
NUMATIK ENGINEERS PVT. LTD.
6, Bobby Pathak Avenue, Near Corporation Bank, Opp. Rotary Garden, C.S. Complex, Dahisar (E), Mumbai - 400068, Maharashtra, India
Phone:91-22-28480866/28482642/28480100/28483848
Fax:91-22-28480100
Email Us : water.tech60@yahoo.com
Send SMS
Key Personnel
Mr. Manu C. Patel (Director)
Mobile:+919820684990, +919820684981


 
 
Copyright © 2011-12 by NUMATIK ENGINEERS PVT. LTD. All Rights Reserved.